PolyFlex flexible 3D printing wire needn’t heat floor in the printing process and has good adhesion strength with mainstream backplane materials.
It has high adhesion between the layers at the same time that ensures the printed pieces have higher toughness.
Key FeaturesTech Spec
PolyFlex flexible 3D printing wire needn’t heat floor in the printing process and has good adhesion strength with mainstream backplane materials (yellow tape, yellow high temperature membrane, etc.), and it has high adhesion between the layers at the same time that ensures the printed pieces have higher toughness.
PolyFlex can cooperate Poly Plus PLA and PolyP Mas PLA products to achieve double material printing and be used for the preparation of the combination of soft/hard to printing.
PolyFlex is easy to absorb moisture in the air and it is affected with damp easily that will lead printing effect to be poorer, therefore wire moistureproof for PolyFlex is more important, if the PolyFlex is not used, please remove the heavy printer and save with aluminum valve bag and dry bag. Don’t put the PolyFlex for a long time in the air. The heart wire clip is used for tensioning and fixed wire in order to avoid the wire being flabby and so on. Before the formal using of PolyFlex wire, it needs to get off heart type clamp which can be saved for repeated use.
